Hookup wap com
Choose from indoor, outdoor or AP accessories below.
Cisco APs are strong and reliable but require a little more configuration than your typical Linksys, Dlink, or Netgear.
You can also power the AP over the Ethernet wire with Po E (802.3af) On this model of AP, you will notice 4 black rubber covers.
We have attempted to configure the device as documented, but cannot get the user ID to authenticate. But to my surprise, whenever i put it on the network, the whole network connected to one Light-Wave 8 port switch disconnects from the rest of the LAN. hi i new in setup wireless network…so if you please provided me more information about the first step when attatch my cisco access point to my lan…..note: my lan take static ip from range of PAT thanks alot hi i new in setup wireless network…so if you please provided me more information about the first step when attatch my cisco access point to my lan…..note: my lan take static ip from range of PAT..i mean how access cisco access point at first time and i don’t have DHCP server …to reach to the step of configure the static ip to the access point thanks alot Hi Renato, I got a air-lap1242ag and to get to the IOS u simply press the mode button and connect the power on the router, then u wait for an amber light to stay permanent under status (20 to 30secs) the u plug in a console cable and open a hyperterminal window on your pc and it’s just like access the CLI for any other Cisco device. I have the two radios enabled and Fast Ethernet as well. On my laptop I see two wireless access points coming from the 1242AG.
My problem is i want to downgrade the air-lap1242ag to work as autonomous as I have no controller for this. Regards Spikon Why can’t I access a CISCO Aironet 1242AG, I can ping it but I can’t get a login screen to come up in explorer, I have serveral PC’s, turning off firewall, different IE but without any luck, any idea’s? The default which I think is coming from the Fastethernet and the one from the the SSID. I just wanted this to be a simple setup process, but cisco doesnt seem to like simple and their quick starts guides and setup guides are just HORRIBLE. Dhcp Server on switch **Copy and paste** Conf t Vlan 10 Int vlan 10 IP address 10.1.1.125184.108.40.206 No shut Exit Ip dhcp exclude-address 10.1.1.1 – 10.1.1.9 Ip dhcp pool WIFI network 10.1.1.0 /24 Default 10.1.1.1 Exit **add the port connected to the AP t0 vlan 10** Console to the AP and it will pick up an IP address.
I have excellent signal strength on the SSID, but very low on the fastethernet.
The 1242AG is a powerful business-grade wireless AP and lots of features.
While it costs much more than a consumer grade wireless AP, I believe you will find the features are well worth it.
Search for Hookup wap com:
If you have connected the antenna at the port at the bottom or the one at the top. If not sure, just swap the connection and it should be fine. I’ve been thinking about using them as repeaters but i’m not shure that this is the right way. In the article there is a very wrong onfo about external antennas.